The Honda E1000 is AC/DC single-phase, 2-pole portable generator with 1.0 KVA of rated power and 50/60Hz of rated frequency (depending on model). The E1000 generator is available with AC 120V or 240V (depending on model) and DC 12V rated voltage (E1000T model only).
The Honda E1000 generator used the Honda G40 single-cylinder gasoline engine with 170 cm3, (10.4 cu·in) of displacement. The engine has a side-valve (L-head) design, a wet-sump lubrication system, a and horizontal carburetor with a butterfly valve. The cylinder bore and the piston stroke are 66.0 mm (2.6 in) and 50.0 mm (2.0 in), respectively. The compression ratio rating is 6.5:1.
The engine produced 4.2 PS (3.1 KW; 4.2 HP) at 4,000 rpm of maximum horsepower and 3.3 PS (2.4 KW; 3.2 HP) at 3,600 rpm of rated power.
General information
| Generator Specifications | ||
| Model | Honda E1000 | |
| Dimensions (L x W x H): | 604 x 345 x 475 mm (23.3 x 13.6 x 18.7 in) | |
| Dry weight | 53.0 kg (116.9 lbs) | |
| AC Rated voltage: | T,A: 120V; E,S,U: 240V; | |
| AC Rated output: | 1 KVA | |
| AC Maximum output: | – | |
| Rated frequency: | T,E,U: 50 Hz; A,S: 60 Hz | |
| DC output: | 12V/24V up to 4.2A | |
| Fuel tank capacity | 6.0 liters (1.6 US gal, 1.3 Imp. gal) | |
| Engine | ||
| Model | Honda G40 | |
| Displacement | 170 cm3 (10.4 cu-in) | |
| Bore x stroke | 66.0 x 50.0 mm (2.7 x 2.0 in) | |
| Max. horsepower | 4.2 PS (3.1 KW; 4.2 HP) at 4,000 rpm | |
| Rated power | 3.3 PS (2.4 KW; 3.2 HP) at 3,600 rpm | |
| Carburetor | Horizontal type, butterfly valve | |
| Cooling system | Forced-air | |
| Ignition system | Flywheel magneto ignition | |
| Lubricating system | Wet sump | |
| Starting system | Recoil starter | |
| Stoping system | Ignition primary circuit ground | |
| Fuel used | Unleaded gasoline (octane number 86 or higher) | |
Maintenance data
| Oil system | |
| Oil type | API MS or DG |
| Recommended oil | SAE 30, 20, 20W, 10W |
| Oil capacity | 0.6 L (0.63 US. qt, 0.53 Imp. qt.) |
| Ignition system | |
| Spark plug | NGK: B4H |
| Spark plug gap | 0.7 mm (0.028 in) |
Author:
Be the first to comment