Power King 1214 garden tractor specs and service data

The Power King 1214 is a garden tractor model from the 1200 series, manufactured from 1988 to 1993 by Power King (a part of Engineering Products Company) in Beaver Dam, Wisconsin, USA. It was available in two-wheel drive (2WD) version.

The Power King 1214 is equipped with a 512 cc (31.2 cu·in) single-cylinder gasoline engine with 88.9 mm (3.5 in) of the cylinder bore and 82.6 mm (3.25 in) of the piston stroke, and a shaft-driven hydrostatic transmission with infinite forward and reverse (2-range) gears.

The Power King 1214 garden tractor features:

The Kohler Magnum M14 gasoline engine which produces 14.3 PS (10.5 kW; 14.0 HP) at 3,600 rpm of horsepower
Manual steering
Disc brakes
Open operator station
Sleeve hitch (optional)
Independent front PTO with electro-magnetic clutch
Independent (optional) rear PTO with 2000 rpm
18.9 liters (5.0 US gal.; 4.2 Imp. gal) fuel tank
Lawn/turf 16×6.50-8 front tires and 23×10.50-12 rear tires

General specifications

General Specifications
Model	Power King 1214
Tractor type	Garden tractor
Production years	1988-1993
Factory	Beaver Dam, Wisconsin, USA
Dimensions and weight
Length	1,720 mm (67.7 in)
Width	1,040 mm (40.9 in)
Height (steering wheel)	1,060 mm (41.7 in)
Wheel base	210 mm (8.3 in)
Ground clearance	1,210 mm (47.6 in)
Weight	309 kg (681 lbs)
Fuel capacity
Fuel tank capacity	18.9 liters (5 US gal.; 4.2 Imp. gal)

Engine

Engine
Engine model	Kohler Magnum M14
Engine type	4-stroke, L-head, single-cylinder
Displacement	512 cm³, (31.27 cu·in)
Max. horsepower	14.3 PS (10.5 KW; 14.0 HP) at 3,600 rpm
Max. torque	–
Cooling system	Forced air
Air cleaner	High-density paper
Lubricating system	Splash type
Ignition system	Electronic magneto ignition system
Fuel system	Side-draft carburetor with adjustable jet
Fuel used	Unleaded gasoline (octane number 86 or higher)
Starting system	Recoil or electric starter
Governor	Centrifugal governor
PTO shaft rotation	Counterclockwise (from PTO shaft side)
Dry weight	58.5 kg (129.0 lbs)
Valve clearance
Intake valve clearance:	0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve clearance:	0.43-0.48 mm (0.0169-0.0189 in)
Oil system
Oil type:	API SF or SG
Recommended oil:	Summer: SAE 30 Winter: SAE 5W-20, 5W-30
Oil capacity:	1.9 L (2.00 US. qt, 1.67 Imp. qt.)
Ignition system
Spark plug:	Champion RH10
Spark plug gap:	0.65 mm (0.0256 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)
Ignition coil air gap	0.30-0.40 mm (0.012-0.016 in)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Manual
Brakes	Disc brakes
Transmission
Transmission manufacturer or model	–
Transmission type	Shaft-driven hydrostatic
Gears	Infinite forward and reverse (2-range)
Speed	Forward: 12.1 kmh (7.5 mph) Reverse: 6.9 kmh (4.3 mph)

Tires

Tires
Front tires	Lawn/turf: 16×6.50-8
Rear tires	Lawn/turf: 23×10.50-12

Rear Hitch

Three-Point Hitch
Category	Sleeve hitch (optional)
Control type	–
Lift capacity (at ends)	–

PTO (Power take-off shaft)

PTO
Front PTO type	Independent with electro-magnetic clutch
Front PTO speed	–
Rear PTO type	Independent (optional)
Rear PTO speed	2000 rpm

Electrical system

Electrical system
Ground	Negative
Charging system	–
Charging amps	15A
Battery	12V, 45Ah

Attachments

Power King 42″ mid-mount mower deck with 3-blade, right-discharge and hydraulic lift
Cutting width	1,060 mm (42.0 in)
Cut height	30-110 mm (1.5-4.5 in)
Power King 48″ mid-mount mower deck with 3-blade, right-discharge and hydraulic lift
Cutting width	1,210 mm (48.0 in)
Cut height	30-110 mm (1.5-4.5 in)
Power King 48″ front-mount blade
Cutting width	1,210 mm (48.0 in)
Power King 54″ front-mount blade
Cutting width	1,370 mm (54.0 in)
Power King 47″ front-mount two-stage snowblower
Cleaning width	1,190 mm (47.0 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Power King 1214