Cub Cadet HDS 2135

Cub Cadet HDS 2135The Cub Cadet HDS 2135 is a lawn tractor model from the 2000 series, manufactured from 1994 to 1998 by Cub Cadet (a part of MTD). It was available in two-wheel drive (2WD) version.

The Cub Cadet HDS 2135 is equipped with a 398 cc (24.3 cu·in) single-cylinder gasoline engine with 87.0 mm (3.43 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke, and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet HDS 2135 lawn tractor features:

  • The Kohler Command CH12.5 gasoline engine which produces 12.6 PS (9.3 kW; 12.5 HP) at 3,600 rpm of horsepower or the CH13 with 13.3 PS (9.75 KW; 13.0 HP) at 3,600 rpm of horsepower for 1998 and 1999 model yaers
  • Manual steering
  • Internal expanding brakes
  • Open operator station
  • Independent front PTO with electric clutch
  • Lawn/turf tires, front: 15×6-6, rear: 20×9-8
  • 11.4 liters (3.0 US gal.; 2.5 Imp. gal) fuel tank

General specifications

General Specifications
ModelCub Cadet HDS 2135
Tractor typeLawn tractor
Production years1994-1998
Factory
Dimensions and weight
Length1,820 mm (71.7 in)
Width1,140 mm (44.9 in)
Height1,060 mm (41.7 in)
Wheelbase1,190 mm (46.9 in)
Ground clearance150 mm (5.9 in)
Weight255 kg (562 lbs)
Front tread760 mm (30.0 in)
Rear tread690 mm (27.5 in)
Fuel capacity
Fuel tank capacity11.4 liters (3.0 US gal.; 2.5 Imp. gal)

Engine

Engine (1994-1997)
Engine modelKohler Command CH12.5
Engine typeFour-stroke, air-cooled, OHV
CylindersSingle
Fuel typeGasoline
Displacement0.4 L, 398 cm2, (24.3 cu·in)
Bore and stroke87.0 mm X 67.0 mm (3.43 in X 2.64 in)
Compression ratio8.5:1
Horsepower12.6 PS (9.3 kW; 12.5 HP) at 3,600 rpm
Max. torque20.5 N·m (2.1 kg·m, 15.1 ft·lb) at 2,500 rpm
StarterElectric 12V
Oil system
Lubrication system:Full pressurized
Oil type:API SJ or higher
Recommended oil:SAE 10W-30
Oil capacity: W/o oil filter: 1.7 L (1.8 US. qt, 1.5 Imp. qt.)
With oil filter: 1.9 L (2.0 US.qts, 1.7 Imp. qts)
Ignition system
Spark plug:Champion RC12YC
Spark plug gap:1.02 mm (0.040 in)
Spark plug torque:38.0-43.4 Nm (3.9-4.4 kgf·m; 28.0-32.0 lb·ft)
Engine (1998-1999)
Engine modelKohler Command CH13
Engine typeFour-stroke, air-cooled, OHV
CylindersSingle
Fuel typeGasoline
Displacement0.4 L, 398 cm2, (24.3 cu·in)
Bore and stroke87.0 mm X 67.0 mm (3.43 in X 2.64 in)
Compression ratio8.5:1
Horsepower13.3 PS (9.75 KW; 13.0 HP) at 3,600 rpm
Max. torque28.8 Nm (2.9 kg·m; 21.2 ft·lb) at 2,400 rpm
StarterElectric 12V
Oil system
Lubrication system:Full pressurized
Oil type:API SJ or higher
Recommended oil:SAE 10W-30
Oil capacity: W/o oil filter: 1.7 L (1.8 US. qt, 1.5 Imp. qt.)
With oil filter: 1.9 L (2.0 US.qts, 1.7 Imp. qts)
Ignition system
Spark plug:Champion RC12YC
Spark plug gap:1.02 mm (0.040 in)
Spark plug torque:38.0-43.4 Nm (3.9-4.4 kgf·m; 28.0-32.0 lb·ft)

Transmission and chassis

Chassis, steering and brakes
Chassis4×2 2WD
Steering typeManual
BrakesInternal expanding
Transmission
Transmission manufacturer or model
Transmission typeShaft-driven hydrostatic
GearsInfinite forward and reverse
Speed Forward: 9.3 kmh (5.8 mph)
Reverse: 4.8 kmh (3 mph)
Transmission oil capacity7.1 L (1.9 US. gal, 1.6 Imp. gal.)

Tires

Tires
Front tiresLawn/turf: 15×6-6
Rear tiresLawn/turf: 20×9-8

PTO (Power take-off shaft)

PTO
Front PTO typeIndependent with electric clutch
Front PTO speed

Electrical system

Electrical system
GroundNegative
Charging systemFlywheel alternator
Charging amps15A
Battery12V CCA: 275A

Attachments

Cub Cadet: 38″ mid-mount mower deck with 2-blade and manual lift
Cutting width960 mm (38 in)
Cut height30-100 mm (1.5-4.25 in)
Cub Cadet 190302: 42″ front-mount blade
Width1,060 mm (42 in)
Cub Cadet 190303: 40″ two-stage front-mount snow blower with manual lift
Width1,010 mm (40 in)
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.


*