Kubota A-155 is a utility tractor model from the Aste series, manufactured from 1992 to 1996 by Kubota. It was available in four-wheel drive (4WD) version.
The Kubota A-155 is equipped with a 0.9 L (54.8 cu·in) three-cylinder diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke, and transmission with 6 forward and 2 reverse gears.
The Kubota A-155 utility tractor features:
The Kubota D905 diesel engine which produces 16.0 PS (11.8 kW; 15.8 HP) of horsepower. Open operator station with two-post ROPS Category 0 rear hitch Rear PTO with 540 rpm General specifications General Specifications Model Kubota A-155 Tractor type Utility tractor Production years 1992-1996 Factory – Dimensions and weight Length 2,530 mm (99.6 in) Width 1,040 mm (40.9 in) Height 1,800 mm (70.9 in) Wheel base 1,350 mm (53.1 in) Ground clearance 290 mm (11.4 in) Weight 664 kg (1,464 lbs) Fuel capacity Fuel tank capacity 17.0 liters (4.5 US gal.; 3.7 Imp. gal)
Engine Engine Engine model Kubota D905 Engine type 4-stroke, SOHC, three-cylinders Displacement 0.9 L, 898 cm2 , (54.8 cu·in) Max. horsepower 16.0 PS (11.8 kW; 15.8 HP) Cooling system Liquid-cooled Fuel used Diesel fuel Starting system Electric starting with 12V starter Starting support device Glow plug in combustion chamber Governor All speed mechanical governor Charging system Alternator 12V PTO shaft rotation Counterclockwise Valve clearance Intake valve clearance: 0.145-0.185 mm (0.0057-0.0073 in) Exhaust valve clearance: 0.145-0.185 mm (0.0057-0.0073 in) Oil system Lubrication system Forced lubrication by trochoid pump Oil type CF or higher Recommended oil: SAE 10W-30, 10W-40 Oil pressure At idle speed: 49 MPa (0.5 kgf/cm2 , 7 psi)At rated speed: 196 to 441 MPa (2.0-4.5 kgf/cm2 , 28 to 64 psi) Oil filter Full flow paper filter (Cartridge type) Oil pressure indicating Electrical type switch Oil and oil filter change interval Every 200 hours Fuel system Fuel injection pump: Bosch MD type mini fuel injection pump Injection nozzle: Mini Nozzle (DNOPD) Firing order: 1-2-3 Injection pressure: 13.73 MPa (140 kgf/cm2 , 1,991 psi)
Transmission and chassis Chassis, steering and brakes Chassis 4×4 MFWD 4WD Steering type – Brakes – Transmission Transmission manufacturer or model Transmission type – Gears 6 forward and 2 reverse Speed Forward: 12.0 kmh (7.5 mph)Reverse: 5.6 kmh (3.5 mph)
Tires Tires Front tires Ag: 5.00-12Rear tires Ag: 8-16
Rear Hitch Three-Point Hitch Category 0 Control type – Lift capacity (at ends) –
PTO (Power take-off shaft) PTO Rear PTO type – Rear PTO speed 540 rpm
Electrical system Electrical system Ground Negative Charging system – Charging amps – Battery 12V
Author: Sergei Wers About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.
ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace. We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.
The Kubota A-155 is a utility tractor model from the Aste series, manufactured from 1992 to 1996 by Kubota. It was available in four-wheel drive (4WD) version.
Author:
Be the first to comment