Cub Cadet i1046 lawn tractor specs and service data

The Cub Cadet i1046 is a lawn tractor model from the iSeries series, manufactured from 2007 to 2009 by Cub Cadet (a part of MTD). It was available in a two-wheel-drive (2WD) version.

The Cub Cadet i1046 is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet i1046 lawn tractor features:

The Kohler SV710 gasoline engine which produces 20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm of horsepower
Differential steering
Dry disc brakes
Open operator station
Independent middle PTO with electric clutch

General specifications

General Specifications
Model	Cub Cadet i1046
Tractor type	Lawn tractor
Production years	2007-2009
Factory	–
Dimensions and weight
Length	1,750 mm (68.9 in)
Width	–
Height	–
Wheel base	1,200 mm (47.2 in)
Weight	249 kg (550 lbs)
Fuel capacity
Fuel tank capacity	10.6 liters (2.8 US gal.; 2.3 Imp. gal)

Engine

Engine
Engine model	Kohler SV710
Engine type	Four-stroke, air-cooled, V-twin
Cylinders	2
Fuel type	Gasoline
Displacement	725 cm³, (44.2 cu·in)
Bore and stroke	83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Compression ratio	9.0:1
Horsepower	20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm
Starter	Electric
Oil system
Lubrication system:	Full pressurized
Oil type:	API SJ or higher
Recommended oil:	SAE 10W-30
Oil capacity (with filter):	1.5 L (1.6 US.qts, 1.32 Imp. qts)
Ignition system
Spark plug:	Champion RC12YC
Spark plug gap:	0.76 mm (0.0299 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)
Valve clearance
Intake valve clearance:	0.101-0.152 mm (0.004-0.006 in)
Exhaust valve clearance:	0.101-0.152 mm (0.004-0.006 in)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Differential
Brakes	Dry disc
Transmission
Transmission manufacturer or model	Hydro-Gear EZT
Transmission type	Belt-driven hydrostatic
Gears	Infinite forward and reverse
Speed	Forward: 9.7 kmh (6.0 mph) Reverse: 5.1 kmh (3.2 mph)

Tires

Tires
Front tires	Lawn/turf: 15×6-6
Rear tires	Lawn/turf: 20×8-8

PTO (Power take-off shaft)

PTO
Middle PTO type	Independent with electric clutch
Middle PTO speed	–

Electrical system

Electrical system
Ground	Negative
Charging system	Alternator
Charging amps	15A
Battery	12V, CCA 235A

Attachments

Cub Cadet 46″ mid-mount mower deck
Cutting width	1,160 mm (46 in)
Cut height	30-90 mm (1.25-3.72 in)
Cut positions	6
Cub Cadet: 46″ front-mount blade
Width	1,160 mm (46 in)
Cub Cadet 42″ front-mount snowblower
Width	1,060 mm (42 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Cub Cadet i1046